Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text
Interpret
as SSI_CTRL
SS_IN_SEL=Val_0x0
Description
SPI Control Register
Fields
SS_IN_SEL
SS_IN Mode Select
One bit for each SPI module:
Bit 3: SPI3
Bit 0: SPI0
Note: If the corresponding SPI module is configured as a master, the associated bit in this field should be set to 0x1.
If the corresponding SPI module is configured as a slave, and the master device is driving a slave select signal, the associated bit in this field should be set to 0x0. If the master device is not driving a slave select signal, the associated bit in this field should be set to 0x1, and the associated bit in SS_IN_VAL field should be set to 0x0.
0 (Val_0x0): SS_IN from I/O pin
1 (Val_0x1): SS_IN from SS_IN_VAL
SS_IN_VAL
SS_IN Value
One bit for each SPI module:
Bit 11: SPI3
Bit 8: SPI0
When SS_IN_SEL = 0x1, the programmed SS_IN_VAL is fed to SPI module.
Note: If the corresponding SPI module is configured as a master, the associated bit in this field should be set to 0x1.